万博体育manbetex手机登录|官网

  • 大区经理:陶经理:13011716033
  • 技术咨询:詹经理:18663767799
  • 地址:山东省济南市历城区工业北路58号恒大城K栋3-3110室
新闻资讯当前位置:首页-新闻资讯
    万博体育手机官网登录生产厂家​是如何正确的呢?
    2020-4-8 11:14:22

    清洁仪器,万博体育手机官网登录器在使用中,需要注意很多方面,这也是许多机器的一个常见特性,我们不能决定哪些清洁效果,或清洗效果是好的,但我们可以决定哪些机器需要维护方法。

      In the use of cleaning instruments and ultrasonic cleaning machines, we need to pay attention to many aspects, which is also a common feature of many machines. We can't decide which cleaning effect or cleaning effect is the best, but we can decide which machines need maintenance methods.

      1. 在清洗过程中,要注意很多地方,特别是超声波控制柜顶部的进气口,严禁将导电液体(如水)溅出,否则会对清洗机的管路系统造成严重的损坏;

      1. In the cleaning process, pay attention to many places, especially the air inlet at the top of the ultrasonic control cabinet. It is forbidden to spill conductive liquid (such as water), otherwise it will cause serious damage to the pipeline system of the cleaning machine;

      2. 机器放置时应时刻保持清洁,不使用时应关闭电源;

      2. Keep the machine clean at all times when it is placed, and turn off the power when it is not in use;

      3.我们的机器不是防撞产品,所以在使用时,避免机器碰撞或剧烈震动;

    万博体育手机官网登录生产厂家

      3. Our machines are not anti-collision products, so when using, avoid machine collision or violent vibration;

      4. 本机不适合电子元件和电路在高温下使用,应远离热源。

      4. This machine is not suitable for the use of electronic components and circuits under high temperature, and should be far away from the heat source.

      5. 在远离热源的同时,应避免将机器放置在潮湿的环境中;

      5. Keep away from heat source and avoid placing the machine in humid environment;

      6. 机器连续工作时间不得超过4小时,如果连续工作时间过长:

      6. The continuous working time of the machine shall not exceed 4 hours. If the continuous working time is too long:

      将超声波调节旋钮旋转到“0”位置,冷却风扇继续工作。超声波清洗未启动的情况下,超声波控制柜应继续散热至少2分钟;

      Turn the ultrasonic adjustment knob to the "0" position, and the cooling fan will continue to work. When the ultrasonic cleaning is not started, the ultrasonic control cabinet shall continue to heat for at least 2 minutes;

      7. 机器长时间运行后清洗干净,关机前应先将电源旋钮调至零,关机后用风扇再工作3 - 6分钟,以确保电源内热熄灭;

      7. Clean the machine after long-time operation. Before shutdown, turn the power knob to zero. After shutdown, use the fan to work for another 3-6 minutes to ensure that the heat in the power supply goes out;

      8. 清洗液应及时沉淀、过滤或换,以保证清洗效果。

      8. The cleaning solution shall be precipitated, filtered or replaced in time to ensure the cleaning effect.

      以上就是万博体育手机官网登录生产厂家对万博体育手机官网登录维护的方式的详细介绍,想要了解多请点击官网

      The above is a detailed introduction to the maintenance methods of ultrasonic cleaner by the manufacturer of ultrasonic cleaner. For more information, please click http://www.sinkohl.com